Ideally suited for pressing and bundling of folded sheets (signatures), brochures, Book- Blocks etc. for Perfect and Hard-Case Binding process. The Hydraulically pressed bundles preserve the fresh/crisp look of the print as it prevents air & dust from spoiling the folded sheets(signatures). It protects the edges and facilitates stacking & storing of the bundles (pre /post gathering /collating) for optimum utilization of space.

A process of reducing/knocking out the SWELL in the spine of thread-sewn Book-Blocks or gathered folded-forms (signatures) being prepared for Hard-Case or Soft Cover Perfect Binding. Ensures the Book-Blocks are rectangular in shape and free from extreme gradients in the folded/sewn area for quality and enhanced life of the BOOK.PLC based Control Panel for optimum reliability and simplified diagnostics. Other operator friendly features are: Selection of Manual or Semi-auto mode; Counter for number of Book-blocks processed; Dedicated switches for Clamping and Nipping functions in Manual Mode.

Smashing is the process of compressing and removing the air from the folds and flattening of the Overall area of the Book-Blocks. Smashing strokes can be set in multiples to suit the compacting requirement for the desired rectangular shape. After the Smashing cycle the Book-Block is held firmly and Nipping operation follows for knocking out the excessive swell in the spine. Book-Block should be rectangular in shape and free from extreme gradients in the folded sewn area for quality & enhanced life of the BOOK.

NIPPING-the process of reducing / knocking out the Swell in the spine of: Thread-sewn Book-Block or gathered/collated folded-forms (signatures) being pressed for Hard-case or Soft Cover / Perfect Binding. SMASHING-the process of removing the air from the folds and flattening the overall area of the Book-Blocks. BOOK-BLOCK should be rectangular in shape and free from extreme gradients in the folded sewn area for quality and enhanced life of-the BOOK.

JA commitment to the Binding (Post-Press) industry, for providing off-line economical dedicated solutions for preparing and finishing Book-blocks for soft/hard cover requirement; is further extended by adding Booklet Three Side Trimmer to the range.Semi-automatic Three Knife Trimmer with manual feeding of Booklets to meet the demand of higher production with maximum operator efficiency and safety.

Book Spine Pre-Gluer equipped with Hot Air IR Dryer, is the most economical system for preparation of Book-Blocks suitable for Soft or Hard Case Binding by pre-gluing and drying of section-sewn, pre-smashed and nipped signatures.The process ensures that the Book-Blocks maintain its rectangular shape,which is free from extreme gradients in the folded sewn area.

contribution to Book-Block preparing is well acknowledged by the binding fraternity. Rounding & Backing is yet another milestone in our endeavour to continue our efforts in finding solutions for Book-binders. Rounding & Backing is the most important requirement in Hard-cover Binding Process to withstand heavy stresses with the help of structural shape similar to architectural curvilinear form identical to Roman Arch, thus attaining overall durability, usability and enhanced aesthetics.

Ideal Round Cornering Machine for rounding of Catalogues; Books; Exercise Note Books; Diaries and other Stationery articles etc.Heavy duty hydraulic Twin Corner Cutting Press can be fitted with different Tools (Dies) with radius ranging from R-3 to R-14 mm. Each set of cutting tools consist of two parts: an upper blade to be fitted to the Moving Platen and the lower Die to be fitted in a special slot on the working platform.Chute is provided for shavings/cutting waste to be collected in a bin/bag which can be attached (by the user) to the frame.

Pressing of cased-in books and simultaneous burning-in of the JOINTS for forming perfect hinge and permanent shape with the help of temperature-controlled pressure blades (Joint Forming Bars) for Flat or Rounded Spine of Book-Blocks.These blades are spring loaded for adjusting to different depth of joints automatically and hydraulic pressure can be set from 100-300/400kgs to achieve the desired results. The bars (Joint Formers) are supplied for Flat and Rounded Spine Book-backs respectively.

Hydraulic Book Press TBP-II with two independent stations with fixed Pile Height upto 400mm. The printed title can be pasted on open book or board to board size up to 810x525mm with single Platen & day-light area upto 400mm.The press can be used either in Manual or Auto-Mode with each station alternatively or ogether, resetting to loading position after pre-set time. The option to set time on a Digital Timer in Seconds (from 001 to 999).

Customers mostly preferred to purchase quality products,so we are involved in offering best quality of Book Folding Machine.This Book Folding Machine is extensively used while binding books.Also,this Book Folding Machine is known for its superior quality and world class standards.This Book Folding Machine is highly reliable.

Hydraulic Book Press designed specially for Exercise Note Books/stationery Manufacturers. The platen area adequately covers 3-Up/4-Up Exercise Note Books. The printed title can be pasted on open book-size upto 800x500mm/1040x650mm with daylight area upto 260mm on both upper & lower decks-alternatively

A constant dialogue with our customers, to satisfy the need of production requirement has resulted in the Squaring Press to handle 3/-UP Exercise Note Books upto a width of 1020mm.3/4 sets of Exercise Note Books (Composition Books/centre thread-sewn or centre wire-stitched) with heavy duplex board as title can be processed in less than 3/4secs.

Exercise Book Binding is for binding soft title cover staple pin type exercise notebook.It consist of manual bunch feeding table,wire stitching unit,folding unit, mechanical square back pressing unit,book front cutting unit, book separating cutting unit, book delivery table,waste removal trolley, lubrication system & centralized control panel (PLC).

Hydraulic Press for handling of WASTE-Paper, Corrugated Boards, Stationery (sharedded / Un - sheddded). Plasti / Flims etc. Hydraulic device, compact in design, ideally suited for the pressing of said WASTE and manually bundling the presssed bales for saving in storage space, transportation and manpower.

Table Top Glue Applicator for een spread of adhesive at a considerable saving of conumption upto 40% approximately. Suitable for PVA, Cold Glues in general and Hot Animal Glue upto 60^oC to 70^oC. Glue heating by radition through a thermostat control. Glue control through micrometeric scraper roller.